Full
Fenders
W.T.I.
's full fiberglass fenders are just what you need to
add the finishing touch to your truck or trailer. Our
fenders are hand fabricated using the highest quality
fiberglass materials for long lasting durability.
|
The
Full Fiberglass Fenders is the first product W.T.I. introduced.
The fender you see today is actually the second generation
of fender. The second generation fender was designed from
the ground up, not a copy of some other fender.
|
|
|
When designing
and engineering this fender many things were taken into consideration.
- First and foremost, looks. We wanted a fender that looked
good yet is functional.
- A fender and bracket design that would fit most makes and
models of trucks on the road today.
- Also, a fender that is durable and if damaged, easily fixable.
The WTI Full
Fenders drop down and roll around farther on the tire than most
fenders on the market today. This helps to keep
road spray and debris from flying off your tires and hitting
your truck or other traffic on the road.
We
use a special liner for added strength and to improve wear against
typical
road hazards. The underside flat area is reinforced with
a special "V" laminated strip, which adds strength
also. This exclusive design requires no center mounting
bracket or bracing. This feature allows the fenders to
move and flex with the frame. W.T.I. fenders are designed to
be mounted on the front and rear, lower corners.
Gel Coat
Colors
Painting
The black and white
gloss gel coat can be waxed and installed without painting. If
your fenders need to be painted to match the color scheme
of your truck we recommend painting the sandable, gray primer
gel coat fenders. Your fenders cannot be painted before
shipping, however, if you would like W.T.I. Custom Shop to
install the fenders, we can have them painted at a professional
body shop. You will need to supply us with your color
name, paint code and a deposit. The cost for painting sometimes
varies with the color chosen. The W.T.I. fenders will
be painted and ready to install when you come in for your
installation appointment. Installation time is between
4 and 6 hours.
Mounting Brackets
|
Tubular steel
with 1/4" wall |
|
Flat plates
3/8" thick |
|
Gusseted corners |
|
Mitered cuts |
|
Capped ends |
|
Grade 8 & stainless
bolts included |
|
Built Tuff - Built
to Last |
|
Available
for either Standard (52") or Canadian (60")
axle spacing. |
|
Weight: 275
pounds per set (including brackets) (Approximate) |
Complete
step by step instructions (with pictures) are included with
each kit. Please note that due to the variations in each
truck, final installation requires drilling into the frame
and welding.
No
mud flaps are required on W.T.I. Fenders, however if you would
prefer to have mud flaps we have a mud flap bracket available. They
are welded on to the bottom of the rear fender bracket.
 |
|
We offer
technical support by phone at 219-474-6393 during regular
business hours. Complete fender installation services
are also available at our facility in Kentland, IN. Appointment
required. |
Prices
W.T.I. Full Fenders & Brackets |
Call for Pricing |
| W.T.I. Full Fenders & Brackets
60" spread |
Call for Pricing |
Mud Flap Bracket |
Call for Pricing |
Paint brackets only (black) |
Call for Pricing |
Installation in Kentland, IN |
Call for Pricing |
Paint (price varies
by color) |
Call for Pricing |
Prices
are subject to change.
US Dollars
Recommended
5th Wheel Height for all W.T.I. Fenders
(measure from ground to top of fifth wheel)
| If
you have: |
| 22.5 low pro tires |
48"
|
| 22.5 standard tires |
49"
|
| 24.5 low pro tires |
49"
|
| 24.5 tall rubber |
51"
|
This is the minimum height we recommend. This
does not guarantee you will not hit the fenders with the trailer,
but in our experience it has been sufficient. The higher the 5th
wheel the better!
Be sure to check out the Ordering Tips
|
